DME-II_Thermal Engineering -II

-
What is Boiler ?

A boiler is a closed vessel in which fluid (generally water) is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications, including water heating, central heating, boiler-based power generation, cooking, and sanitation.

Various type of Boiler:

1.Fire Tube Boiler

2. Water Tube Boiler






Comments

Post a Comment

Popular posts from this blog

DME-III_Design of Machine Elements_Design of Levers

-
Image
Design of Levers: Hand Lever, Foot Lever, Bell crank lever Design of levers  Key points to remember regarding design of levers: the design of levers is all about finding the dimensions of the levers so that it could perform its function satisfactorily A lever is force multiplier, depending upon the location of the load and effort from the fulcrum point. Levers are classified on the basis of location of load, effort and fulcrum point. Levers are found in numerous machines and devices serving different purposes, mainly force transmission with multiplications. Levers make our day to day life easier, they make ease in lifting, ease in cutting, ease in holding, ease in opening tight things. Hammer claws, wheel barrows, pickup tonges, Scicors, bottle openers etc. are the examples of day to day use of levers. A lever is meant to make the work easy, so it actually reduces the effort required to do a work. The effort is always
Read more

DME-III_Design of Machine Elements_Knuckle Joint_Numerical Problem

-
Image
Summary of Design Procedure(Knuckle Joint) in Tabular form NUMERICAL PROBLEMS   1) It is required to design a Knuckle joint to connect two circular rods which are subjected to an axial tensile load of 50 kN. the material used for joints is 50c8, having  yield point stress 400 N/mm2. taking factor of safety as 5, find the all dimensions of Knuckle joint. 2) A Knuckle joint carries  an axial load of 100 kN.  it connects two circular rods which are made up of material 40c8, having  yield strength 360 N/mm2.  using factor of safety 4 design and draw the Knuckle joint.  Show all important dimensions in the final drawing. 3) Design a Knuckle joint to transmit a load of 50 kN, assume permissible stresses as 40 N/mm 2 in 10 size 40 N/mm 2 in shear and 80 N/mm 2 in compression.Also draw neat dimensioned sketch of Knuckle joint showing all important dimensions designed. 4) designer Knuckle joint subjected to a pull of 30000N.  assume permissible
Read more